福尼斯焊机Fronius焊机伏能士焊机福尼斯TPSi400华南技术服务中心

MIG/MAG一元化脉冲焊机，包含受控熔滴过渡过程的脉冲电弧工艺。在基础电流阶段中，电源供电将降低到一定水平，使电话刚好达到稳定状态，工件表面得到预热。在脉冲电流阶段中，精确的电流脉冲可实现精准的焊接材料熔滴分离。这一原理基本上可以消除短路以及伴有的熔滴不受控制的焊接飞溅现象，从而保证整个功率范围内的焊接精确且低飞溅。
广州音科机电设备有限公司专业销售奥地利Fronius焊机福尼斯焊机，Fronius福尼斯TPS/i智能平台焊机系统，Fronius福尼斯TPS/CMT焊机系统，Fronius福尼斯TPS/TS系列焊机，Fronius福尼斯氩弧焊机，Fronius福尼斯手工焊机。   
福尼斯焊机Fronius焊机伏能士焊机福尼斯TPSi400
MIG/MAG一元化脉冲焊机，包含受控熔滴过渡过程的脉冲电弧工艺。在基础电流阶段中，电源供电将降低到一定水平，使电话刚好达到稳定状态，工件表面得到预热。在脉冲电流阶段中，精确的电流脉冲可实现精准的焊接材料熔滴分离。这一原理基本上可以消除短路以及伴有的熔滴不受控制的焊接飞溅现象，从而保证整个功率范围内的焊接精确且低飞溅。
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Industry Canada RSS
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.